A factory may process FSC-certified timber alongside conventional timber every day. Both materials can pass through the same warehouse, use similar equipment, and become part of products that look almost identical when they leave the production line.

The challenge begins when the company needs to establish which materials were used in a particular product and what claims can legitimately be made about it.

A supplier invoice may identify the incoming material, but that alone does not establish how the material was handled afterward. Warehouse staff may move stock between locations, production teams may combine batches, and leftover materials may return to inventory. At each stage, the company needs a reliable way to distinguish FSC-certified inputs from non-FSC materials and maintain the records needed to support its product claims.

Under FSC Chain of Custody (CoC), this is not simply a matter of keeping two types of materials in separate piles. It requires a control system that connects material identification, inventory management, production activities, and sales documentation.

‍

One Production System, Different Material Statuses

FSC-certified and non-FSC materials can be handled within the same production facility, provided the applicable FSC requirements are met and the company uses an appropriate control system.

The key distinction is that sharing a production system does not mean treating all materials as equivalent.

FSC-certified inputs have a defined status supported by supplier documentation and applicable FSC claims. Non-FSC inputs do not automatically acquire that status because they enter the same facility, pass through the same machinery, or become part of the same product range.

The company must be able to determine which materials are eligible for use in FSC product groups and how their status is maintained throughout the production process.

Depending on the operation, this may involve physical segregation, clear identification, controlled handling procedures, or other measures permitted under the applicable FSC requirements. The appropriate approach depends on the materials, production flow, and control system used by the company.

The objective is straightforward: material status must remain clear, and the FSC claims made on finished products must be supported by the applicable requirements and records.

‍

Where Material Control Can Break Down

The most difficult control issues do not always occur during production. They can emerge during routine activities that seem unrelated to certification. 

  • Material Receiving: Verify Before Stocking
    The first control point is receiving. When materials arrive, the company needs to verify that the delivery matches the purchase order and supporting documentation. For materials purchased as FSC-certified, this includes checking the relevant supplier details, product information, quantities, and FSC claim stated on applicable sales documents. The company should not rely solely on a supplier's general statement that it sells FSC-certified materials. The status of the specific transaction must be supported by the relevant documentation. If the delivery contains discrepancies, unclear claims, or missing information, the material should be held from use in FSC production until the issue has been resolved according to the company's procedures. This initial verification matters because an error at receiving can follow the material through inventory, production, and eventually into sales documentation.
  • Material Identification: Make Status Visible
    Once received, materials need to remain identifiable. A stock record may show that a particular batch is FSC-certified, but warehouse personnel also need a practical way to identify that batch when handling the physical material. Labels, batch numbers, location codes, barcode systems, or other suitable methods can connect the material to its records. Identification becomes especially important when FSC and non-FSC materials have similar specifications or packaging. For example, two timber batches may have the same dimensions and appearance but different material statuses. If their labels are removed or their storage locations are not clearly controlled, employees may select the wrong batch without noticing the difference. An effective identification system should make the status of the material easy to verify at the point of use, rather than requiring employees to reconstruct its history after a mistake occurs.
  • Storage and Internal Movement: Prevent Uncontrolled Mixing
    Physical segregation is one way to reduce the risk of material mix-ups. FSC and non-FSC materials can be assigned separate storage zones, clearly marked racks, or designated containers where appropriate. However, segregation is not always limited to separate warehouse areas. In some operations, materials may share storage or handling infrastructure, provided the company implements suitable identification and control measures that meet the applicable requirements. Internal movements also deserve attention. Materials transferred between warehouses, production areas, or facilities should retain their identification and traceability. If a batch is divided into smaller quantities, the related records should continue to connect those quantities to the original material. The same principle applies to returned stock, production leftovers, and unused materials. Returning material to inventory without confirming its identity and status can introduce uncertainty into an otherwise controlled system.
  • Production: Link Inputs to the Right Output
    Production is where material control becomes more complex. A manufacturing order may require several inputs, and the company may run different product types on the same equipment. Without clear production instructions and material checks, non-FSC inputs could be selected for an order intended to produce FSC-claimable products. The company should define how production personnel verify material status before issuing stock to an order. Production records should then identify the relevant inputs, quantities, production order, and resulting output as appropriate to the control system. Where materials are split, combined, or processed into different product types, the company needs records that explain how those movements relate to the original inputs. This is also where the applicable FSC control system matters. Companies using a transfer system, percentage system, or credit system must follow the requirements relevant to that system. The rules governing eligible inputs, conversion factors, claim calculations, and outputs are not interchangeable. In every case, the company needs enough evidence to establish that the FSC claim assigned to an output is permitted by the applicable rules and supported by its records.

‍

Stock Records and Production Records Must Tell the Same Story

Inventory and production records serve different purposes, but they should not contradict each other.

Stock records help establish what material the company received, its status, where it was stored, and how much remains available. Production records show how material was issued and processed, and how much output was generated.

Consider a simple example.

A company receives an FSC-certified material batch and records 1,000 units in inventory. Production later issues 600 units to a manufacturing order. The company records the remaining 400 units as available stock.

The figures are only meaningful if the production records can establish what happened to the 600 units issued. The resulting output, any relevant conversion factors, and any production losses need to be accounted for according to the company's process and applicable FSC requirements.

If the stock system shows 400 units remaining but the production records do not explain the 600 units issued, the company has a gap in its material accounting. If the finished-product records also fail to connect the output to the original input, traceability becomes more difficult to demonstrate.

This does not mean every business needs an expensive or complex software platform. A well-controlled spreadsheet-based system may be suitable for some operations. What matters is whether the records are accurate, consistently maintained, and sufficient to demonstrate the required material flow and claims.

‍

Product Claims: The Final Check Before Products Leave the Company

Even when material handling and production records appear complete, the final product claim still needs to be verified.

An FSC claim on an invoice, delivery document, or other applicable sales record must be consistent with the product's eligibility, the company's certificate scope, and the relevant FSC requirements. The claim cannot be based solely on the fact that some FSC-certified material was used somewhere in the facility.

For example, if an order was intended to use FSC-certified inputs but the production team accidentally issued non-FSC material, the company cannot simply retain the intended FSC claim and correct the paperwork later. It must assess the discrepancy, follow its documented procedures, and determine what claims, if any, are permitted for the affected output.

A useful final control is to compare the finished product and its production records against the sales documentation before the claim is issued. This helps identify discrepancies while the order is still traceable and before the claim reaches the customer.

The principle is simple: a product claim must reflect what the company's records and applicable FSC rules can substantiate, not what the company intended to produce.

‍

What Companies Should Review Under FSC CoC 3.0

Managing FSC and non-FSC materials in one production system requires more than a written procedure. Companies should review whether their actual operations still match the controls documented in their FSC CoC system.

This review can include:

  • Material identification: Are FSC and non-FSC materials distinguishable during receiving, storage, and production?
  • Stock management: Can the company trace material movements, transfers, returns, and remaining quantities?
  • Production control: Do work orders and production records link eligible inputs to the corresponding outputs?
  • Claim verification: Are product claims checked against applicable requirements before sales documentation is issued?
  • Responsibility: Do warehouse, purchasing, production, and sales teams understand their roles in preventing incorrect claims?
  • Change management: Are new suppliers, product groups, production arrangements, or recordkeeping systems reviewed before they affect the existing control process?

These checks are particularly relevant when a company changes its operating model. A control procedure that worked for a limited product range may no longer be sufficient after the business adds new materials, introduces additional production steps, or outsources part of its processing.

The purpose of reviewing the system is not to add unnecessary paperwork. It is to identify where material status could become unclear and ensure that controls remain effective under actual operating conditions.

‍

Keeping Material Status and Product Claims Aligned

FSC and non-FSC materials do not necessarily require completely separate production facilities. They do, however, require a control system that prevents their status from being confused and ensures that product claims remain supported.

That control begins when material is received and continues through identification, storage, internal movement, production, inventory reconciliation, and sales documentation. A weakness at any stage can affect the company's ability to demonstrate traceability.

For companies applying FSC CoC 3.0, the practical question is not simply whether FSC and non-FSC materials are present in the same facility. It is whether the company can account for their movement and demonstrate that every FSC claim is permitted and supported by the relevant records.

Foresta Consulting helps companies review their FSC Chain of Custody processes, identify gaps in material control, and strengthen the alignment between documented procedures and actual production practices. Contact Foresta Consulting to discuss your company's FSC CoC certification needs.

Sertifikasi merupakan salah satu cara terbaik untuk memperkuat kompetensi dan daya saing di era digital 4.0. Dengan memiliki sertifikasi yang diakui, profesional dapat memposisikan diri mereka sebagai pemimpin dalam industri mereka, meningkatkan kredibilitas mereka, dan membuka pintu untuk peluang karir yang lebih baik. Oleh karena itu, investasi dalam sertifikasi adalah langkah yang bijaksana bagi siapa pun yang ingin berhasil dalam dunia bisnis yang terus berubah ini.

Konsultasi dan Dapatkan Sertifikasi yang Tepat Untuk Kebutuhan Perusahaan Anda

Hubungi Kami
alt
alt
Delivering The Experts
Delivering
alt
alt
The Experts

Konsultasi dan Dapatkan Sertifikasi yang Tepat Untuk Kebutuhan Perusahaan Anda

Hubungi Kami

Artikel dan Berita Lainnya